Print

Munro DamBox


Munro DamBox

Water Feature Protection

The Munro DamBox provides the ultimate water feature pump protection by monitoring and responding to the water level inside a skimmer box.


The Problem: As filters become clogged, the water flow to the pump chamber may not be able to sustain the full capacity of the pump.

Without the Munro DamBox – An unprotected float switch will turn the pump off, allowing the water level to rise. With the higher water level the float switch will turn the pump on again. The pump pumps the chamber dry and turns back off. The damage cycle continues until an operator notices the problem or the pump fails.

With the Munro DamBox – The DamBox will lock-out the pump when the switch drops to indicate a water supply problem versus an incoming flow problem. Once the filter is cleared, a push of a button reactivates the pump protection.

CONSTRUCTION

  • Ground lug
  • Quick-connect terminals
  • UL listed relay
  • UL-50 Type 3R listed enclosure – approved for outdoor use, available in stainless steel or powder coated blue

Optional Features


DamBox - Reduced External Voltage

  • Transforms all outbound voltage to a low, safe 24v, especially important when external sensors or switches are used.
  • Designed for use with water features utilizing float switches.
  • This option is safer if people or pets come in contact with external sensors or switches.

DamBox - Thermal Protection

  • Provides the pump motor with thermal overload protection, even when the motor itself does not.
  • Thermal protection and cycling protection are both provided within one enclosure.
  • Thermal protection auto-resets upon cool-down, even if the cycle protection does not.
  • Available for pumps 3 hp and above.

DamBox-reduced-explosion.jpg

Specifications

Voltage Phase Enclosure Color Safe 24v Signal Model Number
110 VOLT 1 BLUE MBPD110
110 VOLT STAINLESS MBPD110S
220 VOLT BLUE MBPD220
220 VOLT STAINLESS MBPD220S