Print

MU Series Self-Priming High / Medium Head Pumps 7 1/2 - 20 hp


MU Series Self-Priming High / Medium Head Pumps 7 1/2 - 20 hp

These pumps are ideally suited to turf irrigation applications where greater flows and higher heads are required.

  • Bronze impeller – the enclosed, single piece design is balanced and trimmed for specific operating range.
  • Mechanical shaft seal – proven toughness stands up to less than ideal situations
  • Heavy-duty motor – lasts longer and provides application flexibility.

COMMON APPLICATIONS

  • Turf irrigation: Residential, mid-size community or commercial
  • Booster
  • Water transfer

ADVANTAGES

Versatile – These pumps can be used for a wide variety of applications, including irrigation, draining barges and tank cars, and dewatering mines or underground storage facilities. Homeowners use them for sprinkler systems and swimming pools. When it comes to moving water from one place to another, there’s no end to the jobs that a self-priming pump can handle!

Quick start-up – Because these pumps are self-priming, there is no additional work required to get the pump ready to operate. Just install, fill and go!

Specifications - Pump - H Series

HP Suction Discharge Approx Ship Weight/Lbs Max Liquid Temp Max Case Pressure psi Model Number
7.5 3" 3" 225 100˚ 120 MU75HS
7.5 174 MU75HT
10 229 MU10HS
10 197 MU10HT
15 210 MU15HT

Specifications - Motor - H Series

HP Phase Volts Run Amps Motor Type Max Liqiud Temp Max Case Pressure psi Model Number
7.5 1 208-230/460 30.5-28.2/14.1 TEFC 100˚ 120 MU75HS
7.5 3 230/460 17.5/8.76 ODP MU75HT
10 1 208-230/460 41.8-38.8/19.4 TEFC MU10HS
10 3 208-230/460 25.7-25.2/11.6 ODP MU10HT
15 3 230/460 34.0/17.06 ODP MU15HT

Specifications - Pump - M Series

HP Suction Discharge Approx Ship Weight/Lbs Max Liquid Temp Max Case Pressure psi Model Number
7.5 4" 3" 225 100˚ 120 MU75MS
7.5 174 MU75MT
10 229 MU10MS
10 197 MU10MT
15 210 MU15MT
20 241 MU20MT

Specifications - Motor - M Series

HP Phase Volts Run Amps Motor Type Model Number
7.5 1
208-230/460
30.5-28.2/14.1 TEFC MU75MS
7.5 3 230/460 17.5/8.76 MU75MT
10 1 208-230/460 41.8-38.8/19.4 MU10MS
10 3 208-230/460 25.7-23.2/11.6 MU10MT
15 3 230/460 34.0/17.0 MU15MT
20 3 208-230/460 51.3-46.4/23.2 MU20MT

 

HighHead-dimensions-(1).png

Single Phase
HP A B C D E F G H I J K L M N
7.5 15 1/4" 8 3/4" 26 5/8" 6 1/8" 2 3/4" 2 7/8" 3 1/2" 5 1/2" 5 1/4" 10 9/16" 7 15/16" 15 5/32" 9 5/16" 4 1/4"
10 15 1/4" 8 3/4" 27 1/4" 6 1/8" 2 3/4" 2 7/8" 3 1/2" 7" 5 1/4" 10 9/16" 7 15/16" 15 5/32" 9 5/16" 4 1/4"

 

Three Phase
HP A B C D E F G H I J K L M N
7.5 15 1/4" 8 3/4" 23 1/2" 6 1/8" 2 3/4" 2 7/8" 2 3/4" 4 1/2" 4 1/2" 10 9/16" 7 15/16" 15 5/32" 8 3/32" 3 3/4"
10 15 1/4" 8 3/4" 25 5/8" 6 1/8" 2 3/4" 2 7/8" 3 1/2" 5 1/2" 5 1/4" 10 9/16" 7 15/16" 15 5/32" 9 5/16" 4 1/4"
15 15 1/4" 8 3/4" 27 1/4" 6 1/8" 2 3/4" 2 7/8" 3 1/2" 7" 5 1/4" 10 9/16" 7 15/16" 15 5/32" 9 5/16" 4 1/4"
20 15 1/4" 8 3/4" 29 1/2" 6 1/8" 2 3/4" 2 5/8" 4 1/4" 8 1/4" 7" 10 9/16" 7 15/16" 15 5/32" 11" 5"

 

Three Phase TEFC
HP A B C D E F G H I J K L M N
7.5 15 1/4" 8 3/4" 30 13/16" 6 1/8" 2 3/4" 2 7/8" 2 3/4" 4 1/2" 4 1/2" 10 9/16" 7 15/16" 15 5/32" 8 3/32" 3 3/4"
10 15 1/4" 8 3/4" 35 1/4" 6 1/8" 2 3/4" 2 7/8" 3 1/2" 7" 5 1/4" 10 9/16" 7 15/16" 15 5/32" 9 5/16" 4 1/4"
15 15 1/4" 8 3/4" 35 1/4" 6 1/8" 2 3/4" 2 7/8" 3 1/2" 7" 5 1/4" 10 9/16" 7 15/16" 15 5/32" 9 5/16" 4 1/4"
20 15 1/4" 8 3/4" 42" 6 1/8" 2 3/4" 2 5/8" 4 1/4" 10" 7" 10 9/16" 7 15/16" 15 5/32" 11" 5"