Print

Munro LP 1502


Munro LP 1502

This very unique pump offers multi-stage performance with single-stage simplicity. The Munro LP 1502 self-priming centrifugal pump provides higher operating pressure like a multi-stage pump without the additional maintenance concerns multiple impellers present. Built for maximum durability and longevity.

  • Brass impeller – tough and long lasting, one brass impeller means you’ll see less maintenance than with other pumps that offer similar performance
  • Silica carbide/carbon seal – proven toughness stands up to less than ideal situations
  • Heavy-duty motor – lasts longer and provides application flexibility

COMMON APPLICATIONS

  • Residential clean water turf irrigation: Small to mid-size community or commercial turf irrigation
  • High-pressure booster
  • Water transfer

ADVANTAGES

Multi-stage performance with single-stage simplicity – This self-priming pump is truly unique and in a class by itself, delivering almost 60 gpm at 60 psi. The high-pressure capabilities of this pump can be compared to other brand’s multi-stage or 5hp pumps.

Durable and long lasting – Before the LP 1502, only a multi-stage pump could achieve this performance to horsepower ratio. However, additional impellers require a longer shaft, which puts more load on the motor bearing and creates maintenance issues, including misalignment and wear. Keeping the shaft short makes the pump more stable and durable. Add to this our cast iron construction and brass impeller and it’s clear that this is a pump made to stand the test of time, even in more unusual or difficult environments.

Easy to install and maintain – Two priming ports make the Munro LP 1502 easy to install and two drain valves make winterization a snap. A stainless steel wear ring reduces oxidation and friction, minimizing wear and repairs. If you should have to service the pump, stainless steel bolts and dry-socket design provide easy access.

Specifications - Pump

HP Phase Discharge Suction Approx Ship Weight/Lbs Max Liquid Temperature Model Number
2 1 1-1/2" 2" 120 180º LP1502B
2 3 115 LP1502B3

Specifications - Motor

HP Phase Voltage Hz RPM Motor Voltage (Factory) Connected Service Factor Amps Model Number
Single Phase Three Phase
115V 208V 230V 115V 208V 230V
2 1 208/230 60 3450 208/230V -- 17.2 17.6 -- -- -- LP1502B
2 3 208/230/460 -- -- -- 5.7 5.6 2.8 LP1502B3

For amperage ratings consult motor nameplate. Specifications subject to change without notice.

 

HP A B C D E F G H I J K L M
2 19 1/2" 4 1/4" 7.95" 14" 9 1/4" 11 1/4" 13 1/2" 11 1/2" 3" 5 3/4" 4" 7" 8"

 

 

Performance

HP

Capacity - U.S. Gallons per Minute Discharge Pressure (PSI) at 5' Suction Lift

Shut Off Pressure Psi Model Number
20 30 40 50 60 70 80 90
2 -- -- 75 67 56 38 0 0 80 LP1502B

Suction lift varies, depending upon elevation (altitude) and water temperatures. Max lift is 15 feet at 5000 feet elevation. Maximum case pressure is 150 PSI.